LG BNU-BAC Owner's Manual page 26

How to install
2. Setting the gateway address
Press the buttons by the following order. And then, when the following menu is displayed on the
BACnet Gateway LCD screen, press the "MENU/SELECT" button to enter the gateway address.
MENU/
SELECT
Use the up/down/left/right button ( , , , ) to select the desired address.
MENU/
SELECT
3 After entering the last address, press the "MENU/SELECT" button to set the entered address
to the gateway address.
(When there is no "MENU/SELECT" button input for 5 seconds, the set value is ignored to return to
the existing address.
MENU/
SELECT
26 BACnet Gateway
[LCD screen]
[MENU]
Set GW address
[Example for setting the gateway address]
[Set GW address]
165.186.002.001
[LCD screen after completing the setup]
BACnet Gateway
SW ver. 1.0.0
[Set GW address]
192.168.000.000