Upgradingyour Software And Firmware; Important Safety Instructions - Kodak SLICE User Manual

Appendix
Upgrading your software and firmware
Make sureyou are usingthe latestversionsof KODAK Softwareand camerafirmware
(the softwarethat runson the camera).Go to www.kodak.com/go/sJkedowrfloads.
Important safety instructions
CAUTION:
Do not disassemblethis product; there are no user-serviceable parts
inside. Refer servicingto qualified service personnel. KODAKAC Adapters
and Battery Chargersare intended for indoor useonly. The use of controls,
adjustments, or procedures other than those specified herein may result in
exposure to shock and/or electrical or mechanical hazards.If the LCD
breaks, do not touch the glass or liquid. Contact Kodak customer support.
Theuseof an accessory that is not recommended by Kodakmaycausefire, electric
shock,or injury. Forapprovedaccessories, visit www.kodak.com/go/accessories.
Useonly a USB-certified computerequippedwith a current-limiting motherboard.
Contactyour computermanufacturer if you havequestions.
If usingthis product in an airplane,observeall instructionsof the airline.
Whenremovingthe battery, allow it to cool; it may be hot.
Followall warningsand instructionssuppliedby the batterymanufacturer.
Useonly batteriesapprovedfor this productto avoid risk of explosion.
Keepbatteriesout of the reachof children.
Do not allow batteriesto touch metal objects,includingcoins.Otherwise, a battery
may short circuit, dischargeenergy,becomehot, or leak.
Do not disassemble, install backward,or exposebatteriesto liquid, moisture,fire,
or extremetemperature.
www.kodak.com/go/support _ 53