Stopping The Engine - Husqvarna RZ4219 Operator's Manual

Hide thumbs Also See for RZ4219:
Table of Contents

Advertisement

OPERATION
Stopping
the Engine
Allow the engine to idle a minute to attain normal
operating temperature
before stopping it, if it has
been worked hard. Avoid idling the engine for longer
periods, as there is a risk of the spark plugs fouling.
1.
Disengage the mower deck by sliding the blade
control lever out of the lock notch and down into
the lower position.
Disengage the mower blades
8058-074
2.
Raise the mower deck by pulling the lifting lever
upward to the transport position.
3.
When the machine is standing still, activate the
parking brake by pulling the lever backward.
4.
Move the throttle to the minimum position (tortoise
symbol). Turn the ignition key to the stop position.
Never use choke to stop the engine.
5.
Move the steering controls outward.
6.
Remove key. Always remove key when leaving the
mower to prevent unauthorized use.
IMPORTANT INFORMATION
Leaving the ignition switch in any other
position
than OFF will cause the battery to be
discharged,
Raise the mower deck with the tiffing lever
8058-085
31

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

250201

Table of Contents