Advertisement
CHECK T_REPRESSURE
The tires on your tractor were ovednflated at the factory
for shipping purposes.
Correct tire pressure is important
for best cutting performance.
•
Reduce tire pressure to PSi shown in "PRODUCT
SPECIFiCATiONS"
section of this manual.
CHECK
MOWER
LEVELNESS
For best cutting results, mower should be properly leveled.
See "TO LEVEL MOWER HOUSING" in the Service and
Adjustments section of this manual.
CHECK
FOR
PROPER
POS_T_ON
OF ALL
BELTS
See the figures that are shown for replacing motion, mower
drive, and mower blade drive belts in the Service and Ad-
justments section of this manual. Verify that the belts are
routed correctly.
CHECK
BRAKE
SYSTEM
After you learn how to operate your tractor, check to see that
the brake is properly adjusted. See "TO ADJUST BRAKE"
in the Service and Adjustments section of this manual.
,/ CHECKMST
BEFORE YOU OPERATE AND ENJOYYOUR NEW TRAC-
TOR, WE WISH TO ASSURE THAT YOU RECEIVE THE
BES TPERFORMANCEAND
SATISFACTION FROM THIS
QUALITY PRODUCTT
PLEASE REVIEW THE FOLL OWING CHECKL IS 7.
,/
All assembly instructions have been completed.
,/
No remaining loose parts in carton.
,/
Battery is properly prepared and charged.
(Minimum
1 hour at 6 amps).
,/
Seat is adjusted comfortably and tightened securely.
,/
All tires are properly inflated. (For shipping purposes,
the tires were overinflated at the factory).
,/
Be sure mower deck is properly leveled side-to-side/
front-to-rear for best cutting results.
(Tires must be
properly inflated for leveling).
v_ Check mower and drive belts. Be sure they are routed
properly around pulleys and inside all belt keepers.
v_ Check wiring. See that all connections are still secure
and wires are properly clamped.
,/
Before driving tractor, be sure freewheel control is in
drive position.
WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY
EXTRA ATTENTION TO THE FOLLOWING IMPORTANT
ITEMS:
v_ Engine oil is at proper level.
,/
Fuel tank is filled with fresh, clean, regular unleaded
gasoline.
,/
Become familiar with all controls - their location and
function. Operate them before you start the engine.
,/
Be sure brake system is in safe operating condition.
,/
It is important to purge the transmission
before oper-
ating your tractor for the first time. Follow proper start-
ing and transmission
purging instructions
(See "TO
START ENGINE" and "PURGE TRANSMISSION"
in
the Operation section of this manual).
9
Advertisement
Troubleshooting
