MOTOR
PULLEY
6. Place one end of the new belt over the metal motor pulley. Lettering
on belt should be visible and not against pulleys. Slip the other end
around the plastic pulley end of the agitator.
(See illustration)
AGITATOR
END PLATE
7, Grasp the agitator
frimly
with
one hand.
(Be sure you can see
the agitator
end plate,)
Engage
screwdriver
as shown
for lever-
age,
8. Lift and pull using screwdriver
as a lever.
Guide the end opposite
the belt into position
first,
9. Quickly
roll the other side of
agitator
into place.
10, Press firmly
to be sure agitator
is securely
in place.
17