Table of Contents
Advertisement
3. Push cardboard
bag collar firmly
onto fill tube by first,
positioning
bottom
of collar,
and then top,
onto tube.
Make sure the collar
is
pushed
past the raised portion
at
the top and bottom
and tightly
in
place on the tapered
portion
of the
tube.
This will insure
a firmly
seal-
ed position.
4. Tuck remainder
of bag into
outer jacket.
Zip shut.
The headlight
Disconnect
cleaner from elec-
trical outlet.
This cleaner uses two 12 volt,
wedge base type 912 bulbs.
1. Lower
the handle
until the
cleaner
is positioned
with the bag
flat on the floor.
2. Use screwdriver
to lift lens.
Place screwdriver
in the two slots
provided
at the top edge under
ridge of lens as shown.
Turn
screwdriver
to loosen
lens.
Page 14
Hide quick links:
Advertisement
Table of Contents
