Clock Set; Auto Channel Set; Signal Source - Hitachi 27CX28B Operating Manual

Set-Up Features
Clock Set
Clock (when set) will display on screen at initial "Turn On",
after a channel change and when pressing the RECALL
button. The time must be set first in order to operate the
Event Program Timer.
NOTE: This feature will be disabled when Auto Power
On is activated.
1. Press
2. Press CURSOR • or • and • or • to highlight
the Set-Up Icon.
MENU
3. Press O to display the Set-Up Menu.
4. Press CURSOR • or • to set hours (set AM/PM
accordingly).
5. Press CURSOR • to select minutes position.
6. Press CURSOR • or • repeatedly to set minutes.
MENU
7. Press O twice to exit menus.
Signal Source
The proper Input mode must be selected for the type of
signal at the antenna input.
• TV mode is used when the television is not connected to
a cable TV system, for example when using a VHF/UHF
antenna (channels 02 - 69).
• Cable mode is used when the television is connected to
a Cable TV system and you are not using a cable
company converter box (channels 01 - 125).
MENU
1. Press _ ° ~
2.
Press CURSOR • or • and • or •to highlight
the Set-Up Icon.
MENU
3.
Press 0 to display the Set-Up Menu.
4. Press CURSOR • to highlight SIGNAL SOURCE.
5. Press CURSOR • or • to select rv or CATV1.
NOTE: This feature is disabled when Quick Lock is
activated.
6. Press _ twice to exit menus.
Auto Channel Set
This feature allows you to place all channels with a video
signal into Channel Scan Memory.
MENU
1. Press _,
2. Press CURSOR • or • and • or • to highlight
the Set-Up Icon.
3. Press _ to display the Set-Up Menu.
4. Press CURSOR • to highlight AUTO CHANNEL
SET.
5. Press CURSOR • or • to start Auto Programming.
Channels willautomatically advance until all channels
have been scanned.
NOTE: This feature is disabled when _Quick Lock is
activated.
MENU
6. Press _ twice aftercompletionof Auto Programming
to exit menus.
- 20 -