Precoded Vcr Buttons - Hitachi 50FX19K Operating Manual

1 HE GENIUS REMU I i- CONTROL ((.;LU-417UI)
In addition to controlling all the functions on your HITACHI Color TV, the new remote is designed to operate different
types of VCR's and CATV (Cable TV)/Satellite converters with one touch. Basic operation keys are grouped together
in one area.
To operate your TV, point the remote at the remote sensor of the TV and press the TV button on the remote. The
remote will now control your TV.
To operate your VCR, point the remote at the remote sensor of the VCR, and press the VCR button on the remote.
The remote will now control your VCR. (See page 22 for instructions on how to program the remote to control your
VCR.)
To operate your Cable/Satellite Box, point the remote at the remote sensor of the cable/satellite box and press the
CABLE button on the remote. The remote will now control your cable/satellite box. (See page 23 for instructions on
how to program the remote to control your cable/satellite box.)
0
HELP PIP CH TVNCR
PiP SWAP MOVE FRZ
0000
V 0-1,,. CH
INPUT SLEEP
0( 0
I
G
H
T
HITACHI
CLU..417UI
®,®
®
®
®
These buttons allow the remote to control your TV,
VCR, or Cable Box depending on which mode is
chosen, as explained above.
LIGHT Bu'n'ON
When you are in a dark room, press this button on
the side of the remote to light up the buttons shown
in (_. The light will stay on for about 8 seconds if
the light button is not pressed again. These buttons
will not appear to light if the room is too bright.
PRECODED VCR BUTTONS
These buttons always transmit the chosen precod-
ed VCR codes.
TV/VCR BUT[ON
When the remote is in the TV or VCR mode, this is
the TV/VCR button. When the remote is in the
CABLE mode, this is the A/B button.
J
14