Table of Contents
Advertisement
HOW TO USE THE REMOTE TO
CONTROL YOUR LCD REAR PTV
(_ASPECT
button
Press this button to quickly change the picture format ASPECT ratio.
Depending on the inputsignal format received, the pictureformat ratioallows you to adjust the images through the followingoptions.
4:3
STANDARD
Use this aspect mode to display conventional (4:3) images. Side panels (gray areas) are placed to the
left and right of the image to preserve the original aspect ratio of the source. Note: Use this mode for
only 15% of your total viewing time to prevent uneven aging of the phosphors. Phosphors in the lighted
area of the picture will age more rapidly than the gray areas.
4:3
EXPANDED
Use this aspect mode to display conventional (4:3) sources by linearly increasing image expansion from
the center towards the edges of the display area in order to fill it.
4:3
Zooml/Zoom2
Use these aspect modes to zoom in on conventional (4:3) sources.
16:9 STANDARD
Use this aspect mode to display 16:9 sources like HDTV end DVD's preserving the original 16:9 aspect
ratio.
16:9 Zoom
Use this aspect to Zoom-in once while in 16:9 aspect.
i_!_!;ii _i ¸
Fiiii(iI,Uii
(1)
NTSC/480i/480P Input
INPUT
4:9 STANDARD
4:3 EXPANDED
4:3 ZCOM1
i
1
] IOl
16:9 ZOOM
16:9 STANDARD
4:3 ZOOM2
(2)
480i/480P Input
INPUT
4:3 STANDARD
4:3 EXPANDED
4:3 ZOOM1
1
1
Io] Io ]-I(]]
16:9 ZOOM
16:9 STANDARD
4:3 ZOOM,?.
(3)
E
HDMI/72OP/1080i Input
INPUT
16:9 STANDARD
16:9 ZOOM
4:3 EXPANDED
t
I
NOTES:
I
1. The Aspect Style settingyou select for an ANT input will automatically be set for the other ANT inputs. However, all I
five video inputs have independent Aspect Style sottings.
2. Vertical position adjustments are directly available when you choose 4:3 EXPANDED/ZOOM1/ZOOM2
or 16:9
ZOOM aspect style (see also page 47).
22
Advertisement
Table of Contents
