Table of Contents
Advertisement
CONNECTING
EXTERNAL
VIDEO DEVICES
CONNECTING A COMPONENT SOURCE TO INPUT 1 OR 2: Y-PBPR .
1.
2.
3.
Connect the cable from the Y OUT of the LaserdiscJDVDplayer or HDTV set top box to the INPUT (Y) jack, as shown on the TV
set below.
i'11 ;ii
Connect the cable from the CB/P B OUT or B-Y OUT of the Lasardisc/DVD player or HD'rV set top box to the INPUT (PB) jack.
CR/P R OUT or R-Y OUT of the laserdisc/DVD player or HDTV set top box to the INPUT (PR) jack.
:
Connect the cable from the
4.
Connect the cable from the AUDIO OUT R of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/R) jack.
5.
Connect the cable from the AUDIO OUT L of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/L) jack.
6.
Press the the INPUTS button, then select INPUT 2 from the INPUTS menu to view the program from the Laserdisc/DVD player
m
or HDTV set top box. The VIDEO OSD label disappears automatically after approximatelyfour seconds.
7.
Select Antenna from the INPUTS menu to retum to the previous channel.
fr
e
@ o -
J
]
L
_
Y
0000
DVD Player
NOTES:
1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is
played back will be abnormal if the connection is loose.
2. See page 13 for tips on REAR PANEL CONNECTIONS.
19
Advertisement
Table of Contents
