Hitachi UitraVision L42S503 Operating Manual page 39

Channe|s
Select Channels to set your signal source options, run New Channel
Scan, Check Signal Meter and Set Channel List (Add channels to
List, Channel/Labels and Favorite Channels).
Video
Audio
Setup
Source Air I_
Signal Strength
New Channel Scan I_
Add Channels to List I_
Channel List I_
Channel Labels i_
Favorite Channels I_
4_1' Move _ Select (_ Return @ Exit
1. Press CURSOR PAD ,ii,, V to highlight functions.
2. Press the SELECT button or CURSOR PAD I_ to selecL
Video
Audio
Setup
Channels
New Channel Scan I_
Add Channels to List i_
Channel List 11,
Channel Labels I_
Favorite Channels ib
4#b Move _ Select (_ Return _ Exit
Add Channels to List
This function allows you to add channels to the channel memory.
Sometimes adjusting the antenna direction will allow reception of
additional channels..
Video
Audio
Setup
Channels
Searching, Please wait ...
Searching Digital OH
Analog Channels Found
Digital Channels Found
10o,_ (
1,
2. Press the SELECT button to start scanning.
3. Press the EXIT button to return to normal viewing.
Only the Channels that have not been added
will be stored.
4_k Move _ Select (_ Return _ Exit
Use the CURSOR PAD to select the Add Channels to List.
to the list
Channel List
This function allows you to review which channels have been
added to the CHANNEL list.
So u roe
Select the signal Source for the TV. '_en using an indoor or outdoor
antenna select Air. When using a cable system select Cable.
Signal Strength
Select Signal Strength when using an indoor or outdoor antenna.
This feature wilt show the signal strength of the Antenna signal to
help you adjust your antenna to optimize signal reception. Use the
MENU button or EXIT button to return.
The Signal Strength meter will not be available
(grayed out) when watching analog channels.
Video
Audio
Setup
Channels
Channel List
Ch 5-0 View
Oh 6-1 XE-rV-DT View
Oh 10-0 View
Oh 15-0 View
Ch 31-1 KNSD-HD View
1.
41€p Move _ Select (_ Return _ Exit
Use the CURSOR PAD to navigate the Channel List.
New Channel Scan
This feature will automatically store active Analog and Digital
channels to the Channel list. This scan will erase all channels
previously stored in the list.
Video
Audio
Setup
Channels
Source Air I_
Signal Strength
Add Channels to List I_
Channel List I_
Channel Labels I_
Favorite Channels It,
2. Press the SELECT or i_ button to select Skip or View.
3. Press the EXIT button to return to normal viewing.
The Channel List cannot be updated by only changing the cable
source. Auto Channel Scan must be performed for the Channel
List to be updated.
'qCb Move _ Select _ Return _ Exit
Use the CURSOR buttons to highlight then press SELECT key
to start.
If you do not want to erase all scanned channels,
please use the Add Channels to List option instead.
39