Hitachi UitraVision L42S503 Operating Manual page 37

HDMI-CEC
Set to 0['4 and this feature will enable the HDMI-CEC signal
bus to allow your Hitachi LCD TV to discover and communicate
automatically with other compatible HDMI-interfaced Audio/Video
equipment. The CEC signal bus makes global controls possible,
based on "plug & play" automation, to minimize the number of IR
remotes and key-presses required for basic operation of your AV
system. Select OFF to disable this option.
Video
Audio
Setup
Channels
Energy Options I_
Transparency 0
Input Labels I_
Component Options Ib
RGB Options I_
Reset AV & Setup I_
_i_ Move _ Select (_ Return _ Exit
Video
Audio
Setup
Channels
Device Auto Off On I_
"IV Auto On On I_
4_1' Move (_ Select (_ Return _ Exit
With the "HDMI-CEC" feature, you can interface the connected
equipmentthrough the HDMI terminal automaticaltyifthe connected
equipment meets the"HDMI CEC (Consumer Electronics Control)"
industry standard. Please check if the connected equipment
supports HDMI CEC before using this feature. For example, here
are three common functions when HDMI CEC is set to ON.
Feature Description
One=Touch Play Pushing the "Play" button on the CEC enabled device will
(TV Auto On) command the device to play, turn the TV on, and the H DM I
input, that the device is connected to, will become the active
input source for the TV,
System Standby When the user turns off the TV, all active CEC enaMed
(DeviceAuto Off) devices on the HDMI input will go to Standby,
Playback Control The user can operate the CEC enabled device's deck
controt functions (i.e. PJay, Stop,Fast Forward and Rewind)
by the TV's remote controFs transport keys (ie. _, 11,414
and l,_,).
Not all devices with an HDMI connection have the
CEC feature. Consult the instruction manuals for the
device you are trying to control to confirm whether or
not CEC is available.
input Labels
Use this feature to give a name to any of the nine video inputs
excluding the TV input.
Video
Audio
Set up
Channels
Energy Options I_
Transparency 0 ml
HDMI- CEC 1_
Component Options I_
RGB Options I_
Reset AV & Setup I_
1.
2
_.), Move _ Select [_ Return @ Exit
Press the CURSOR PAD ,L or T to highlight the Inputs labels.
Press the CURSOR PAD 1_ to select your choices.
Video
Audio
Set up
Channels
Input
Name
Select
HDMI1
,11 Default I_
Save
Reset
_#F Move _ Select [_ Return @ Exit
The Input labels is Grayed out (Skip) or disabled until
you are on the INPUT that you like to change.
Then the Custom option is selected a KEYBOARD wilt
appear on the screen to place your desired label
Component Options
This function allows you to adjust the phase between yourTV and
the Device with component output.
Video
Audio
Setup
Channels
Energy Options
Transparency 0
HDMI - CEC I_
InputLabels I_
RGB Options i_
Reset AV & Setup It,
1.
_l' Move _ Select _ Return _ Exit
Press the CURSOR PAD ,L or T to highlight
Component Options.
2. Press the CURSOR PAD t_ to select your choice.
There are two options for the Component inputs:
Phase: Use this feature to fine4une the display to perfectly
synchronize with the video signal source.
Reset: Return to the original condition for Component inputs.
37