Hitachi 60FX32B Operating Manual page 20

PICTURE-IN-PICTURE (PIP)
PICTURE-IN-PICTURE CONT.
MUI/TI OH PIP
Press the PIP button a second time to begin Multi-Channel PIP. This feature will automatically scan through all
active channels (those set in memory) and display them as PIP sub-pictures, along the right edge of the :_creen.
Press the PIP button a third time to remove the sub-pictures from the screen.
WEEKLY WEEKLY
NOTE!: 1. If no buttons are pressed when in MULTI-CHANNEL PIP mode, auto-scanning will continuously scan.
2. If a channel is tuned during this MULTI-CHANNEL scanning, sub-pictures will be removed from the
screen.
SWAP button
If you wish to switch what is being shown on the main picture to the sub-picture, press the SWAP button.
NEWS STEREO
11-31
ST/SA
VIDEO:I
NOTE:
The SWAP button will only operate when SINGLE PIP mode is chosen.
The SWAP function will not operate if ANT B input is set as the main channel .(ANT B input cannot be
displayed as a sub-picture).
(_) MOVE button
To move the sub-picture to another corner, press the MOVE button. The sub-picture moves one step counter-
clockwise every time the MOVE button is pressed. (Example below illustrates the MOVE operation for initial
shil3ping conditions. If you have customized a PIP position, the MOVE operation may differ slightly from this
example.)
It is also possible to customize one PIP position. To do this, simply use the remote .control REW(4), F.FWD
(1_',,,PLAY (A), or STOP (T) buttons while the sub-picture is displayed, to shift the sub-picture to a 3osition
you prefer.
DAILY
NOTE!: The MOVE and CUSTOMIZING PIP position functions will only operate when SINGLE PIP mode is
chosen
Make s,_re the remote control is in TV mode while customizing the PIP position.
2O