Tips On Rear Panel Connections - Hitachi 60FX32B Operating Manual

REAR SPEAKER TERMINAL CONNECTIONS
Connec[ after turning the power to the TV OFF.
Press the Right Speaker red button and insert the positive (+) lead wire into the hole next to the button. Once the wire
is in place, pull the red button back to original position and the wire is locked into place. In the same manner, press
the Right Speaker black button and insert the negative (-) lead wire. Repeat this procedure for the Left Speaker.
_e CAUTION: Do not short speaker terminals, (do not connect a wire directly across any two terminals). "[his
_, could cause damage to your audio outputs or damage your "IV in other ways.
TO m
EXTERNAL(_]
SPEAKER
O
AUTION:
Do not connect speakers simultaneously to the Rear Speaker terminal of the Projection TV
and an external amplifier. This could damage both the "IV and the speakers. Your IV Jvas
designed to use 8-Ohm speakers only. Any other type may degrade the audio performance
of your entertainment system.
PROJECTION TV SPEAKER AMPLIFIER
TIPS ON REAR PANEL CONNECTIONS
The S-Video connection is provided for high performance laserdisc players, VCRs etc., that have this feature. Use
this connection in place of the standard video connection if your device has this feature.
If your device has only one audio output (mono sound), connect it to the left audio jack on the TV.
Refer 1:othe operating guide of your other electronic equipment for additional information on connecting your hook-up
cables.
A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output
(INPUT: 1 in the example on page 11.) Refer to your VCR operating guide for more information on "line" input-output
connections.
12