Know Your Tractor - Husqvarna GTH2548 Owner's Manual

OPERATION
KNOW YOU R TRACTOR
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR.
Compare the illustrations with your tractor to familiarize yourself with the location of various controls and adjustments.
Save this manual for future reference.
AMMETER
LIGHT SWITCH
HOURMETER
THROTTLE
CONTROL
LIFT LEVER
PLUNGER
LIFT LEVER
BRAKE
s S
_ _ _ s S
s
""" ~
ATTACHMENT
CHOKE CLUTCH SWITCH
CONTROL
MOTION DRIVE
BELTTENSION
HANDLE
HEIGHT
ADJUSTMENT
KNOB
IGNITION SWITCH
MOTION
CONTROL
LEVER
PARKING BRAKE
LEVER
02711
FREE WHEEL CONTROL
FIG. 7
Our tractors conform to the safety standards of the American National Standards Institute.
ATTACH MENT CLUTCH SWITCH - Used to engage mower
blades or other attachments mounted to your tractor.
LIFT LEVER - Used to raise and lower mower deck or
other attachments mounted to your tractor.
LIFT LEVER PLUNGER - Used to release attachment lift
lever when changing its position.
BRAKE PEDAL - Used for braking the tractor and starting
the engine.
MOTION CONTROL LEVER- Selects the speed and direc-
tion of tractor.
CHOKE CONTROL - Used when starting a cold engine.
AMMETER - Indocates charging (+) or discharging (-) of
battery.
LIGHT SWITCH POSITION - Turns the headlights on
and off.
THROTTLE CONTROL - Used to control engine speed.
FREEWHEEL CONTROL - Disengages transmission for
pushing or slowly towing the tractor with the engine off.
IGNITION SWITCH - Used to start and stop the engine.
HOURMETER - Indicates hours of operation.
PARKING BRAKE LEVER - Locks brake pedal into the
brake position.
H EIGHT ADJUSTMENT KNOB - Used to adjust the mower
height.
MOTION DRIVE BELT TENSION HANDLE- Used when
changing motion drive belt and, if necessary, starting engine
under extremely cold conditions.
12