Advertisement
OPERATION
TO CONVERT
MOWER
(See Figs.
7 thru
9)
Your lawn mowerwas shipped readyto be used as a mulcher.
To convert to rear bagging or side discharging:
REAR BAGGING
•
Remove knob secudng mulcher door to mower housing.
•
Open mulcher door and insert tabs of discharge chute
into hinge bracket opening and position rear of chute
over threaded stud.
\\
DISCHARGE
CHUTE TABS_
HINGE BRACKET
MULCHER DOOR
FIG. 7
•
Secure rear of discharge chute to lawn mower housing
with knob.
•
Place rear handle of grass catcher on the crossbar of
the lawn mower's lower handle as shown.
•
Lift the round door of the discharge chute and place
the grass catcher into place on the discharge chute.
NOTE: Be sure round door of discharge chute rests on
grass catcher as shown.
•
Mower is now ready for rear bagging operation.
•
To convert to mulching operation, remove grass catcher
and discharge chute. Secure mulcher door to mower
housing with knob.
•
To convert to side discharging operation, remove grass
catcher and discharge chute.
Install side discharge
deflector and secure it to mower housing with knob.
SIDE DISCHARGING
•
Grass catcher and discharge
chute must be re-
moved.
•
Open mutcher door and install front of side discharge
deflector beneath it as shown.
•
Secure rear of side discharge deflector to lawn mower
housing with knob.
•
Mower is now ready for side discharging operation.
•
To convert to mulching operation, side discharge de-
flector must be removed and mulcher door secured to
mower housing with knob.
•
To convert to rear bagging operation, side discharge
deflector must be removed; discharge chute and grass
catcher installedand discharge chute secu red to mower
housing with knob.
DOOR
CHUTE
GRASS
_KNOB
THREADED
STUD
MULCHER
DOOR
FIG. 8
MULCHER
DOOR
THREADED
STUD
SIDE
DISCHARGE
DEFLECTOR
FIG. 9
8
Advertisement
