Hotpoint HTS17GCSERWW Owner's Manual And Installation Instructions page 19

Installation Instructions
[] REVERSING THE HARDWARE
4.1 Remo_e the base grille (if your reh'igerator has
one) b} pulling it straight otlt.
J
4.2 Mo',e the bottom hinoe_ bracket (and shim glued
to it) and plastic washer from the right side to the
left side.
Plastic Plastic
Washer Washer
Hinge-_ --_
Bracket Hinge
Bracket
Modelswith a hingebracket
that has 2 screw holes.
Modelswith a hingebracket
that has 4 screw holes.
Switchthe hinge pinto the
oppositeside of the bracket.
4.3 Interchange hinge (and the shim glued to it) and
screws at top right with screws at top left of cabinet.
Do not tighten screws on hinge side at this time.
Installingthe hingeon the left. Installingthe hingeon the right.
NOTES:
• Solne hinges have ffmr holes. Which holes wm
use fin" installing the hinge depends on which
side you install the hinge.
• The outer edge of the hinge should be parallel
to the edge of the case fin" correct installation.
I_REVERSING THE DOOR HANDLES
5.1 Transfer fresh food door handle
5.1.1 Remove the bottom cap by pushing it
toward the bottom of the door, and
reillove the screw tlnderneath.
Remove the two screws holding the
handle to the top of the door.
I
5.1.2 Remoxe the handle.
5.1.3 Remo_e the screws from the right edge of the
door top and insert them into the handle screw
holes on the opposite side.
I
19