FujiFilm FINEPIX AX500 Series Owner's Manual page 65

Vew (; Pet _eso a(o_@ _e_
4 Remove the installer CD from the CD-ROM drive. Note that you may be
unable to remove the CD if Safari is running; if necessary, quit Safari before
removing the CD. Store the installer CD in a dry location out of direct sun-
light in case you need to re-install the software.
5 MacOSX 10.5 or earlier: Open the "Applications" folder, start Image Capture,
and select Preferences... from the Image Capture application menu. The
Image Capture preferences dialog will be displayed; choose Other... in
the When a camera is connected, open menu, then select FPVBridge in
the "Applications/FinePixViewer"folder and click Open. Quit Image Cap-
ture.
MacOSXlO.6: Connect the camera and turn it on. Open the"Applications"
folder and start Image Capture. The camera will be listed under DEVICES;
select the camera and choose FPVBridge from the Connecting this cam-
era opens menu and click Choose. Quit Image Capture.
Installation is now complete. Proceed to"Connecting the Camera"(_ 52).
(}o ect<: s 51