Advertisement
REPLACING
THE
S-BAG
TM
DUST
BAG
1
The s-bag
TM
dust bag must be replaced when the indicator
window is completely
red. Read indicator
with the nozzle
lifted.
2
Fold down the carrying
handle. Press the catches
on the
hose, remove the hose and open the cover.
3
Lift out the insert holding the s-bag
TM.
4
Pull the cardboard
to remove the s-bag
TM
from the insert.
This automatically
seals the s-bag
TM
and prevents dust
leaking out.
5 a Insert a new s-bag
TM
by pushing the cardboard
right into
the end of the groove in the insert.
5 b Attach the insert by placing it on the back pegs in the bag
compartment.
Then fold down the insert and close the
cover,
Note: Replace the dust bag when the iHdicator is _d, even if the bag
is not fill
(it could be obstructed). Also replace after vaclmmit_g calpet
cleaning powder. Be sure to use only atl original Electrolux s-bag
TM
Classic, s-bag
TM
CliHic or an s-bag
TM
Anti-odor
dust bag.
Replacement
of the motor
filter
should be dot_e with eve_ y 5tit replacemem of the dust halo,
6
Fold down the carrying
handle. Press the catches,
remove
the hose and open the front cover.
7
Lift out the insert holding the s-bag
TM.
8
Pull the motor filter holder upwards
until it comes away
from the groove.
9
Carefully
pull the old, dirty filter out of the filter holder and
replace it with a new motor filter.
10
Reattach the filter holder containing
the new motor filter.
11
Replace the insert holding the s-bag
TM
and then close the
cover.
Replacement
of the exhaust filter
should be dotte with every 5th replacement of the dust bag.
Note - be sure to unplug the cleaner before changing the dust
bag or filter.
The filters must always be replaced with new ones and cannot
be washed.*
12
Fold up the carrying
handle until it clicks into place.
13
Place your thumbs
on the back edge of the lid and then
open the lid by pulling the handle backwards
and upwards
with your index/middle
finger.
14
Lift out the filter. Insert a new filter and replace the lid as
shown.
On/Off
switch
International symbol I means On, international
symbol 0 means
Off.
*A umshable f!lter can be boul_ooht MSall optiotl.
Advertisement
