Honeywell PRO TH3000 Series Owner's Manual page 13

PRO TH3110D / TH3210D
I _ _ 0 0 |
Temperature Make sure heating and cooling temperatures are set to acceptable ranges:
settings de net • Heat: 40 ° to 90°F (4.5 ° to 32°C).
change
• Cool: 50 + to 99°F (10 ° to 37°C).
"CooJ On" Or
"Heat On" is
flashing
• Compressor protection feature is engaged. Wait 5 minutes for the system
to restart safely, without damage to the compressor (see page 8).
+=Heat On" is not • Set the System switch to Heat, and set the temperature level above the
displayed current room temperature (see page 7).
"Cool On" is net • Set the System switch to Cool, and set the temperature level below the
displayed current room temperature (see page 7).
11