Learn Additional Functions - Hitachi 35TX59K Operating Manual

USING
THE I_ENIUS REMOTE TO LEARN
AF)OITIONAL FUNCTIONS
• The Genius Remote is equipped with a learning function
which allows it to learn additional infrared control codes.
This remote will not only control the television, a VCR,
and a cable box, but also other electronic equipment
which uses an infrared remote transmitter, by learning the
transmitter's codes.
• Only infrared remote control codes can be stored in
memory.
Before starting the memory operation
• Since the infrared signals sent from the remote trans-
mitter may be reflected by a wall, door, etc., even if the
transmitter is not pointed directly at the device, it may
operate. When storing the remote control codes of an-
other device, turn off the power of the device. (VCR,
Cable Converter, etc.)
If you do not do this, the device may work unexpectedly;
the power could be turned on, an important tape could be
erased, the volume could increase too much, etc.
i
i
i
i
i
_J
LEARNABLE BUTTONS
These buttons can "learn" the codes of other remote control
transmitters when the MULTI-PAGE select switch is set to
the "USER."
• MULTI-PAGE keys (A through L): No codes have been
factory stored to these keys.
• Learning buttons other than MULTI-PAGE buttons: The
codes for the TV have been stored in memory. However,
the remote control codes of other equipment (VTR, cable
converter, audio equipment, etc.) can be stored again
using the learning function as shown on page 42 and
later.
(_) EXCLUSIVE BUTTONS
These buttons are for operating the TV.
44