The Remote Control - Hitachi 31CX5B Operating Manual

THE REMOTE CONTROL (CLU-415Ul)
In addition to controlling all the functions on your HITACHI Color TV, the new re_w_ote i s designed to operate different types
of VCR's and CATV (Cable TV) converters with one touch. Basic operation keys are grouped together in one area.
To operate your TV, point the remote at the remote sensor of the TV and press the TV button on the remote. The remote
will now control your TV.
To operate your VCR, point the remote at the remote sensor of the VCR and press the VCR button. The remote will now
control your VCR.
To operate your Cable Box, point the remote at the remote sensor of the Cable Box and press the CABLE button on the
remote. The remote will now control your cable box.
®
RESET SRD "I_/NCR
CD_
PIP SWAP SHIFT FRZ
0000
I REC _ PAUSE
O i
:/',) o
/ I MUTE ] I
AVX RECALL
0@0
HITACHI
CLU,..415UI
®
®
®
®
@
®
®
®
®,®
These buttons allow the remote to control your TV,
VCR, or Cable Box depending on which mode is
chosen, as explained above.
TV/VCR BUTTON
When the remote is in the TV or VCR mode, this is
the TVNCR button. When the remote is in the
CABLE mode, this is the A/B button.
PRECODED VCR BUTTONS
These buttons always transmit the chosen precoded
VCR codes.
RESET BUTTON
Press RESET to return video and audio to factory
settings.
LIGHT BUTTON
When you are in a darkroom, press this button on
the side of the remote to light up the buttons shown
in @. The light will stay on for about 8 seconds if
the light button is not pressed again. These buttons
will not appear to light if the room is too bright.
23