How To Use The Remote To Control Your Tv - Hitachi 60UX58B Operating Manual

HOW TO USE THE REMOTE TO CONTROL YOUR TV
(_ EXIT button
When in MENU mode, this button will e]dt all On-Screen Displays.
RECALL button
Press this button when no menu isdisplayed when you want to check the channel being received, the picture source, if the channel
has stereo (ST) or second audio program (SAP), the time, CHANNEL ID, if the Channel Skip (C.S.) function is activated, if SPECIAL
EVENT REMINDER is set, and if the SLEEP timer is seL
Audio Selected Main Picture Source
Audio .,...... _ J
Broadcast _B_-o A to _CHANNEL ID
s_JsA
10".0ePM9 _Tlln e
PIP l_rlr A 12_
_ Sub-Pioture
Source
Channel __,_, (c.s.)
Skip _ _ _PIP
SLEEP__TIMER _SLEEPO:lS I I_l] , _SPECIAL
_" EVENT
IIIIItll|lll REMINDER
"1
-<[_--When an S-Video
Input is connected
to Video: 1.
,_na COMPONENT:
Y-CbCr Input is
connected to Video: 2.
(_) MENU, CURSOR buttons
All the On-Screen Display features can be set or adjusted by using these buttons.
The MENU button will start the On-Screen Display.
The CURSOR buttons will highlight functions or adjust and set different features.
(_) CHANNEL SKIP button
Press this button when no menu is displayed and the TV will tune to the last channel viewed. The user can change stations "SURF"
to any station they wish, and after 90 seconds, tune back to the odginal channel.
(_) SLEEP button
Press this button to display the sleep timer in the lower left comer of the screen. Every subsequent press of this button will add
15 minutes to this timer, up to a maximum of three hours. Once set, use RECALL when you want to view time remaining. If the
SLEEP button is pressed while the timer is set, it will reset to the odginal condition.
(_ INPUT button
The INPUT button will select between both antenna signals and the three sets of video input jacks each time the button is pressed.
If the Picture-in-Picture is on, the INPUT button will select between the three sets of video input jacks and both antenna sources
when main channel is chosen with the PIP CH button. If the sub-picture is chosen, the INPUT button will select between the three
sets of video input jacks and the ANT A antenna source (ANT B source cannot be displayed as a PIP sub-picture and COMPO-
NENT: Y-CbC r Input 2 source will be displayed as a blank PIP Sub picture.)
INPUT
INPUT
INPUT
INPUT
INPUT
23