Channel Selector - Hitachi 46UX24B Operating Manual

HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV
) ANT button (35UX60B only)
Use the ANT (Antenna) button to select between the VHF/UHF and AUX (Auxiliary) antenna inputs.
NOTE: When VHF/UHF isselected,the channelnumberin the upperright cornerofthe screenis ingreen. When
the AUX input is selected,the channel numberis in yellow.
) MENU, ENTER, CURSOR buttons
All the on-screen display features can be set or adjusted by using these buttons.
The =MENU" button will start or exit the on-screen display.
The =CURSOR" buttons will highlight functions or adjust different features.
These buttons are also used for FAVORITE CHANNELS. (see Page 47.)
The =ENTER" button will set features to your preference.
"CHANNEL SELECTOR" buttons are used to set the time, for channel memory, etc..
) CHANNEL SELECTOR buttons
Enter two or three numbers to select channels. Enter a "0"first for channels 1 to 9. Use the "100" button for channels
100 and higher.
Channel selection may also be performed by pressing channel up ( • ) or down ( • ).
NOTE: The TV may not receive somechannels if you are not in the correct AIR/CABLE mode. See page 44.
) AVX button
The AVX (AuxiliaryVideo)buttonwillselectbetween theantennasignaland the threesets ofvideoinputjackseach
timethe buttonispressed. Ifthe Picture-in-Picture (PinP) ison,the AVX willselectbetween the three setsof video
inputjacks. (See page 32.)
AVX AVX
O O
I
I
VIDEO:3
AVX
O
VIDEO:2
3O