Front Panel Controls; Avx (Audio/Video) Selector; Volume Level; Channel Selector - Hitachi 46EX3B Operating Manual

FRONT PANEL CONTROLS

When both VHF and UHF antennas are connected
Attach an optional ANT. MIXER (antenna cable mixer) to the TV antenna terminal, and
connect the cables to the ANT. MIXER. Consult your dealer or service store for the
ANT. MIXER.
FRONT PANEL CONTROLS
Click to see front panel diagram.

AVX (Audio/Video) selector

Press this button to select the antenna source, video:1, or video:2. Your selection is
shown in the top right corner of the screen.

VOLUME level

Press these buttons for your desired sound level. The volume level will be displayed on
the TV screen.

CHANNEL selector

Press these buttons until the desired channel appears in the top right corner of the TV
screen.

POWER button

Press this button to turn the TV on or off.

POWER light

You will see a red light when the TV is turned on.
NOTE: Your HITACHI TV will appear to be turned "off" if there is no video input when
VIDEO:1 or 2 is selected using the AVX button. Check the Power On indicator to make
sure the TV is off when not in use.
- 12 -