Priority - Hitachi VT-F350A Instruction Manual

CLEARING ("ERASING") INFORMATION FROM A PROGRAM
1. Follow Steps 1 through 5 of "Programming
the timer for unattended recording" on pages
29 and 30.
2. Press "4" button (Program Review).
3. Press "4" again if you want to view the next
program information immediately.
4. Press CLEAR button when the program infor-
mation .you want to clear is displayed.
5. Press the GUIDE button three times to switch
off the on-screen display.
Note:
• Normal program is cleared automatically when
the timer recording is finished, but daily and
weekly programs remain in the timer even
after the timer recording is finished.
PROGRAM PRIORITY
Example 1: When the program start time is the s=
they are recorded in the order of Program 1, 2,
l I
I
IP ' I
rogram 2,
I
l I
i°- I
I i
,ro_ram i
I I
I Program 4 ', t_ II
7:00AM " 8:00AM 9:00AM 10:00AM 11:00AM
,me among the programs on the same day.
: .... 8.
7:00AM - 8:00AM for Program 1
8:00AM - 9:00AM for Program 2
9:00AM - 10:00AM for Program 3
10:00AM - 11:00AM for Program 4
Program 1 is executed as programmed,
and Program 2 as illustrated after Program
1, and Program 3 as illustrated after Pro-
grams 1 and 2, and Program 4 as illus-
trated after Programs 1, 2 and 3.
Example 2: When the programs overlap, an earlier program has priority.
!Program 1 !
I
Program 2 i,
I
I
I
I
I
I
7:00AM 8:00AM
, I
! '
I
I
I i t
Program 3 I
I I
i i
I Program 4 1 = I
9:00AM 10:00AM 11:00AM
7:00AM - 9:00AM for Program 2
9:00AM - 10:00AM for Program 1
10:00AM -- 11:00AM for Program 3
11:00AM - for Program 4
Program 2 is executed as programmed,
and Program 1 as illustrated after Program
2, and Program 3 as illustrated after Pro-
grams 2 and 1, and Program 4 as illus-
trated after Programs 2, 1 and 3.
E32