Haier HWR06XC3-T User Manual page 10

After you plug in the unit it will perform a self test. All the display lights
will turn on for 3 seconds. The LED display will read "88". If any display
light fails to turn on you may need service on the unit. After the 3 seconds
self test the unit will automatically go to the stand by mode. Now all lights
will be off and you will have to turn "ON" by pressing the On/Off key.
After pressing "On/Off", the unit starts to work and enters the status of
"Fan Only" with low setting.
You will have to press the (A) or (v) key on the Temp/Time to set the
temperature at your desired comfort. You can choose between
61 °F and 86°F. Once the temperature is set you can raise or lower it
by pressing the (A) or (,) keys. (Only when the unit is cooling,
can the temperature setting be adjusted.) (See Fig. # 2)
Fig. # 2
Control Panel.
If you want to cool the room press the COOL function. If you just need
to use the fan only, press the Fan function. (See Fig. # 3)
g