EVGA nForce 132-YW-E180 User Manual page 19

Digital pwm motherboard
Table of Contents

Advertisement

Most computer chassis have a base with mounting studs or spacers to allow the
mother board to be secured to the chassis and help to prevent short circuits. If
there are stud(s) that do not align with a mounting hole on the motherboard, it is
recommended that you remove that stud(s) to prevent the possibility of a short
circuit. In most cases, it is recommended to secure the motherboard using a
minimum of eight (8) to ten (10) studs.
Carefully place the motherboard onto the studs/spacers located inside the
chassis.
Align the mounting holes with the studs/spacers.
Align the connectors to the I/O shield.
Ensure that the fan assembly is aligned with the chassis vents according to the
fan assembly instruction.
Secure the motherboard with a minimum of eight-to-ten screws.
This section takes you through all the connections necessary on the motherboard.
This will include:
Power Connections
24-pin ATX power (
8-pin ATX 12V power (
Internal Headers
Front panel
IEEE 1394a
USB Headers
Audio
COM
FDD
IDE
)
PWR1
)
PWR2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nforce 790i sli ftw132-yw-e180-a1132-yw-e179-a1

Table of Contents