Table of Contents
Advertisement
Preparing the Motherboard
Installing the CPU
Be very careful when handling the CPU. Make sure not to
bend or break any pins within the socket. Hold the processor
only by the edges and do not touch the bottom of the
processor.
Use the following procedure to install the CPU onto the
motherboard.
1.
Unhook the socket lever by pushing down and away from
the socket.
2.
Lift the load plate. There is a protective socket cover on
the load plate to protect the socket when there is no
CPU installed.
Remove the protective socket cover from the load plate.
3.
4.
Remove the processor from its protective cover, making
sure you hold it only by the edges.
It is a good idea to save the cover so that whenever you
remove the CPU, you have a safe place to store it.
5.
Align the notches in the processor with the notches on the socket.
Lower the processor straight down into the socket
6.
with out tilting or sliding it into the socket
Make sure the CPU is fully seated and level in the socket.
Close the load plate over the CPU and press down while
7.
you close and engage the socket lever.
Installing the CPU Fan
There are many different fan types that can be used with this motherboard. Follow the
instructions that came with your fan assembly. Be sure that the fan orientation is correct for
your chassis type and your fan assembly.
8
EVGA
Align notches with
notches on the CPU
Advertisement
Table of Contents
