GENTRON GG10000 Owner's Manual page 7

Genera] Precautions
Owner's Manual
Do not smoke, or allow sparks, flames or other sources of ignition around the engine and fuel tank. Fuel
vapors are explosive.
Keep grounded conductive objects, such as tools, away from exposed, live electrical parts and connections
to avoid sparking or arcing. These events could ignite fumes or vapors.
Do not refill the fuel tank while the engine is running or while the engine is still hot. Do not operate the
generator with known leaks in the fuel system
Excessive buildup of unburned fuel gases in the exhaust system can create a potentially explosive condition.
This buildup can occur after repeated failed start attempts, valve testing, or hot engine shutdown, tf this
occurs, open exhaust system drain plugs, if equipped, and allow the gases to dissipate before attempting to
restart the generator.
Use only engine manufacturer recommended fuel and oil.
Hot Components
_ WARNINGEEngine and exhaust system parts become very hot and remain hot for some time after the
engine is run. Wear insulated gloves or wait until the engine and exhaust system have cooled before
handling these parts.
Work Area
Keep your work area clean and well tit. Cluttered benches and dark areas invite accidents.
Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases,
or dust. Generators create sparks which may ignite the dust or fumes.
Keep bystanders, children, and visitors away while operating a generator. Provide barriers or shields as
needed.
Electrical Safety
Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all
codes and ordinances. Never remove the grounding prong or modify the plug in any way. Do not use any
adapter plugs.
Grounding provides a low-resistance path to carry electricity away from the user in the event of an electrical
malfunction.
Double insulated tools are equipped with a polarized plug where one blade is wider than the other. This plug
fits in a polarized outlet only one way. If the plug does not fit fulty in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician to install a polarized outlet. Do not change the plug in any way.
Double insulation eliminates the need for the three-wire grounded power cord and grounded power supply
system.