GENTRON GG3500P Owner's Manual page 22

Owner's anual
Operation (cont'd)
Powering 12 Volt £)C tools and Equipment:
1. Prior to powering tools and equipment, make sure the generator's rated voltage, and amperage
capacity (12VDC) is adequate to supply all electrical loads that the unit witl power. If powering
exceeds the generator's capacity, it may be necessary to group one or more of the tools and/or
equipment for connection to a separate generator.
2. Connect the power cord of a 12 VDC powered tool or equipment to the DC Terminals.
CAUTION: MAKE SURE TO CONNECT THE POSITIVE (+) LEAD OF THE
POWER CORD TO THE POSITIVE (+) TERMINAL ON THE GENERATOR,
AND CONNECT THE NEGATIVE (=) LEAD OF THE POWER CORD TO THE
NEGATIVE (=) TERMINAL ON THE GENERATOR.
3. Disconnect the electrical powered tools' power cord from the generator's DC terminals.
4. After the engine and generator have completely cooled, store the generator in a safe, clean, dry
location (if not already installed in one).
21