Installation Instructions; Preparation - GE AZ75W18DACM1 Owner's Manual And Installation Instructions

Installation
Instructions
Zoneline Air
Conditioners
Questions?Visit our Website at: ge.com or call 800.GE.CARES (800.432.2737).
BEFORE YOU BEGIN
Read these instructions completely and carefully;
• IMPORTANT - S_ve _ l,,,_,,
inslru< lions for local insl)ector's use.
• IMPORTANT - Ob_,rv< a,
,_()V(_l'l]illg (od(s alld or(lill_)l]( (s.
• Note to Installer - Be sure to leave these
illSIrllCliOllS D,:ilh [hc O_*IlCl ",
• Note to Owner
- Keep
lhese insuuctions for
t?[] [!1 r( , ix,l?el-(llC().
• Prop< r installalion is the r_ sponsibility of the
inslall¢ r.
• Product t_dlme due 1o iml)ropcr installation is nol
COY( r(d t/ll<h r th( l_garranty.
TOOLS YOU WILL NEED
Phillipsscrewdriver
Saw
Adjustablewrench
Hammer
Tapemeasure
IMPORTANT ELECTRICAL
SAFETY-READ CAREFULLY
A CAUTION:
• All electrical connections and wiring MUST be
installed by a qualified electrician.
• Follow the National Electrical Code (NEC) and/or
local codes and ordinances.
• For personal safety, this Zoneline unit and case
must be properly grounded.
• Protective devices (fuses or circuit breakers)
acceptable for Zoneline installations are specified
on the nameplate of each unit.
• Do not use an extension cord with this unit.
• Aluminum building wiring may present special
problemsIconsult a qualified electrician.
• X_,_en the unit is not rulming there is still voltage to
the electrical controls.
Disconnect the power to |he unit before
servicing by:
1. Removing the power cord (if it has one) from
the wall receptacle.
OR
2. Removing the branch circuit fuses or turning
the circuit breakers off at the panel.
A IATA DgTT'_T_
_Jk VVZ']UL_NJIL±_IU: B_l_'or_ bcginuing the
installation, switch power off at Ill( s( r_ice panel
and lock the area to prevent pow{r from being
switched on accidentally. When the area cannot
be locked, secmely thst_ n a prominent warning
dexice, such as a tag, to the smwice panel.
10