Installation Instructions
INSTALLING THE WATER LINE (cont.)
[] PLUG IN THE REFRIGERATOR
Arrange
the coil of tubing
so that it does not vibrate
against
the back of the refrigerator
or against
the
wall. Push the refrigerator
back to the wall.
START THE ICEMAKER
Set the icemaker
power switch to the I (on) position.
The icemaker
will not begin to operate
until it
reaches its operating
temperature
of 15°F (-9°C)
or below. It will then begin operation
automatically
if the icemaker
power switch is in the I (on) position.
NOTE:
In lower water pressure
conditions,
the
water valve may turn on up to 3 times to deliver
enough
water to the icemaker.
2O