Controls - GE AER05 Owner's Manual And Installation Instructions

About the controls on the air conditioner.
Features and appearance will vary.
Lights next to the touch pads on the air conditioner control panel indicate the selected settings.
Light indicates the unit
is in the temperature or
Light indicates the unit delay time Set mode.
is in the temperature or
delay time Set mode.
High m Cool
I Ned
I
Energy Saver
! LOW I Fan
Only
_on s ome m odels -- _
Light indicates the
1
delay timer is set.
NOTE: The display always shows the
room temperature except when setting
the Set temperature or the Delay timer.
Auto
High m Coot
Pied _ Energy Saver
LOW J Fun Only
Temp/Delay
Light indicates the [
delay timer Jsset. (on some models)
Air Conditioner Controls
Delay 1-24hr
Delay timer @
Decrease
0 Mode select
0
Fan speed 0
Decreose
Temperature 0
set IncFeose
and
Decreose
I
Remote Control
Delay timer
Increase
Auto Fan on
Fan speed
Increase
Unit power
on/off
Controls (onsome models)
Power Pad
Turns air conditioner on and off. When turned
on, the display will show the room temperature.
Display
Shows the room temperature or time remaining
on the Delay timer. Shows the Settemperature
while setting the temperature in Cool or Energy
Saver modes.The Set light will turn on while
setting.
NOTE: T he display will change to show the room
temperature after settings have been made.
O emp Increase •/Decrease • Pads
Useto set temperature when in Cool or Energy
Saver mode. The Set light will turn on while
setting.
Delay Timer Increase • (4-1/Decrease • (-)
Pads
Eachtouch of the Increase •/Decrease
•
pads on the unit or the Increase +/Decrease -
pads on the remote control will set the delay
time when using the Delay 2-24hr timer. The
Set light will turn on while setting.
O an Speed Pads
Useto set the fan speed to Low, Med, High
or Auto on the unit. NOTE: On the remote
control, use the fan speed Increase + /
Decrease - pads to set the fan speeds to Low,
Med or High. Use the Auto pad to turn Auto
fanon.
0
0
Mode Pad
Useto set the air conditioner to Cool, Energy
Saver or Fan Only mode.
Delay Pads/Delay 2-24hr Pad
Delay ON--When the air conditioner is off, it can
be set to automatically come on in 1 to 24 hours
at its previous mode and fan settings.
Delay OFF--When the air conditioner ison,
it can be set to automatically turn offin 1 to
24 hours.
How to set:
Pressthe Delay 2-24hr pad on the unit or the
Delay pad on the remote control. Eachtouch
of the Increase • /Decrease • pads on the
unit or the Increase +/Decrease - pads on
the remote control will set the timer in 1-hour
intervals. The Set light will turn on while setting.
To review the remaining time on the Delay
2-24hr timer, press the Delay 2-24hr pad on
the unit or the Delay pad on the remote control.
Usethe Increase •/Decrease • pads on the
unit or the Increase +/Decrease - pads on the
remote control to set a new time if desired.
To cancel
the timer, press the Delay 1-24hr pad
until the light on the Delay 1-24hr pad goes off.
4
Note: The default temperature reading on the display is degree Fahrenheit (°F). To change the display to
degree Celcius (°C),press the Temp Increase • and Temp Decrease • buttons together and hold for 3
seconds. Repeat the process to change back to degree Fahrenheit (°F)