Auxiliary Controls - GE AZ58H12EADM1 Owner's Manual And Installation Instructions

Auxiliary Controlson yourZoneline. ge.com
Auxiliary Controls- Dip Switches
The au_lim y dip switch controls are located
behind tile room cabinet, through an opening
below the control panel.
Remove tile room cabinet. See tile
ToRemovethe
Room Cabinet secdon.
Tile owner is responsible for checking switches
and ensucing tile)' are in tile desired position.
Dip Switches
I1 I
C: FANCN(Cooling-SmartFan)
H: FANCY(Heating-SmartFan)
CLASS 2 (Remote Thermostat)
LOADSHEDDING (CDC)
FREEZ S en(Freeze Sentinel)
CONST FAN(Constant O N Fan)
OCCUPIED ( Occupancy Sensor)
UP
DOWN
DIAGNOS (DiagnosticCheck)
BOOST(HeatBoostOperation)
HEATS (HeatSentinel)
TL1(H)(Temp. L imit 1-Heat)
TL2(H)(Temp. L imit 2-Heat)
TL3(H)(Temp. L imit 3-Heat)
TL1(C)(Temp. L imit 1-Cool)
TL2(C)(Temp. L imit 2-Cool)
TL3(C)(Temp. L imit 3-Cool)
All Electric Heat
X._ hen this switch is enabled (liP), heat pump
operation is locked out, causing tile unit to
proxide only electric resistance heat.
0 ;,!¢mmmmmmmlimmmmmmmma
L ALLPR (All ElectricHeat)
Cooling-Smart Fan
_._]/en this switch is enabled
(UP), it allo_vs tile
indoor tim to cycle on/offwith tile compresso_:
X&]/en this switch is disabled
(DOWN),
it allows
tile
indooi" tilil to Illn contintlOtlslv;
0o+,+"
mUam am mm m l Immmmmammmm] o_o
L C: FANCN (Cooling-Smart Fan)
Heating-Smart Fan
_._l/en this switch is enabled
(UP), it allows tile
indoor tim to run continuously. When this
switch is disabled (DOWN), it allows tile indoor
tim to cycle on/off with tile heat pump or
heater oper;ition.
mmmmmiimmmmmmmmm+i
L H: FANCY(Heating-SmartFan)