Onchip Pata/Sata Device - EVGA 141-BL-E759 User Manual

EVGA X58 SLI CLASSIFIED Motherboard
Onboard PATA/SATA Device
Press
Enter
SATA Mode
LEGACY Mode Support
JMB362 SATA Controller
JMB363 SATA/PATA
JMB363 Mode
JMB362 Mode
SATA Mode

This is allows you set the onboard Serial SATA mode.

IDE: Use the Serial ATA hard disk drivers as Parallel ATA storage
devices.

RAID: Create a RAID 0, 1, 10, 5

AHCI: Use the AHCI (Advanced Host Controller Interface) to enables
advanced SATA features for improved performance with NCQ and
Hot-plug features
LEGACY Mode Support

This function allows the SATA controller to operate in LEGACY mode.
Selected Disabled if you install operating system that support Native mode.
JMB362 SATA Controller

This function allows you to enable JMB362 SATA Controller. The options
are Auto, Enabled and Disabled.
JMB363 SATA/PATA Controller

This function allows you to enable JMB363 SATA Controller. The options
are Auto, Enabled and Disabled.
JMB363 Mode

This function allows you set the onboard JM363 mode. The options are IDE
Mode, RAID+IDE Mode, AHCI+IDE Mode, RAID Mode and AHCI Mode.
JMB362 Mode

This function allows you set the onboard JM363 mode. The options are IDE
Mode, RAID Mode and AHCI Mode.
56
to display the Onboard PATA/SATA Device menu.
Controller[Auto]
[IDE]
[Disabled]
[Auto]
[IDE Mode]
[IDE Mode]