24-Pin Atx Power (Pw1) - EVGA 141-BL-E759 User Manual

EVGA X58 SLI CLASSIFIED Motherboard
Serial ATA II

Chassis Fans

USB 2.0

Expansion slots

CMOS Clear Button

Jumper Settings

See Figure 1 on page 14 to locate the connectors and jumpers referenced in the
following procedure.
24-pin ATX Power
is the main power supply connector located along the edge of the board
PW1
next to the DIMM slots. Make sure that the power supply cable and pins are
properly aligned with the connector on the motherboard. Firmly plug the power
supply cable into the connector and make sure it is secure.
Figure 3.
22
(PW1)
Board edge
PW1 Motherboard Connector
PW1 connector
Plug power cable from system
power supply to PW1