DeWalt D55146 Instruction Manual page 4

, Restricting anyofthecom- • Never place o bjects against
pressor ventilation openings orontop ofcompressor
will c ause s erious overheat- pump.
ingand could c ause f ire. ,
Operate compressor in
• Unattended operation of
this product could result in
personal injury or property
damage. To reduce the risk
of fire. do not allow the
compressor to operate unat-
tended.
an open area at least 12"
(30.5 cm) away from any
,wall or obstruction that would
restrict the flow of fresh air to
the ventilation openings.
- Operate compressor in a
clean, dry well ventilated area.
Do not operate unit indoors or
in any confined area.
• Always remain in attendance
with the producl when it is
operating.
• Always turn off and unplug
unit when mot in use.
ADANGER: RISK TO BREATHING (ASPHYXIATION)
WHAT CAN HAPPEN HOWTO PREVENTIT
= The compressed air directly , Air obtained directly from the
from your compressor is not compressor should never
safe for breathing. The air be used to supply air for
stream may contain carbon human consumption, in order
monoxide, toxic vapors, to use air produced by this
or solid particles from the compressor for breathing,
air tank. Breathing these suitable filters and in-line
contaminant's can cause safety equipment must be
serious Injury or death, properly installed. In-line
Sprayed materials such as
paint, paint solvents, paint
remover, insecticides, weed
killers, may contain harmful
vapors and poisons.
filters and safety equipment
used in conjunction with the
compressor must be capable
of treating air to all applicable
local and federal codes prior to
human consumption
Work in an area with good
cross ventilation. Read and
follow the safety instructions
provided on the label or safety
data sheets for the materials
you are spraying. Always use
certified safety equipment:
OSHA/MSHA/NIOSH
respiratory protection designed
for use with your specific
application.