Table of Contents
Advertisement
Installation of the warming drawer.
Read these instructionscompletely and carefully.
InstallationBelow Wall Ovens
Installation below a single oven
23W'
2x2 or 2x4anti4ip --
blockagainstrear
wall 9" fromfloor
to bottomof block
1" Min. abovetoekickor adjust
to oveninstallationheight
Installation belowa doubleoven
10½
NOTE: Addificealclearance betweencutoutsmay
be requiredCheck to be surethat ovensupports
abovethe warmingdrawerIocaticedo not obstruct
the required interior23½"depthand9¼" height.
DimensionA
DimensionB
27" Drawer
251/i"
26¥¢"
30" Drawer
281//'
30"
Abew5/8" ovedap
NOTE: Addificealclearance betweencutoutsmay
be requiredCheck to be surethat ovensupports
abovethe warmingdrawerIocaticedo not obstruct
the required interior23½"depthand9¼" height.
14
2x2 or 2x4anti4ip --
blockagainstrear
_'23¼"_
wNI 9" fromfloor
_t_--_..
to bottomof block
10½
1"Min above t cekick
%When
installed,
the front face of the wanning
drawer will be nearly flush with cabineny
doors
or drawer
fronts.
N Drawer overlaps
will conceal
cut edges on all
sides of the opening.
The rough opening for the drawer must be:
--Depth:
23_/Z' minimum
fi'om inside back to
fi'ont of cabinet
frame.
NOTE: If you are installing in fFameless cabinets,
it may-be necessary to install 1/2" wide cleats to
accept drawer mounting
screws. See drawer to
find exact locations of mounting screws,
Wheninstalledundera wall oven:
Wmaning drawei ,'sare suitable for installation
below only- certain specified wall oven models.
See the label attached Io the top of the wmrning
drawer for suitable models,
--Width: 25W'for 27"wide models
I
l*
tt
*
28k
for30
>ade models,
--Height: 9W"
--Allow
2 minimum
be tween
oven
and
drawe_
NOTE: Elecuical
receptacle
can be installed
as shown for counterlop
installations.
Do not
install receptacle
above the top of the wmrning
drawer
cutout,
cutouts
for clearance
of overlaps.
Advertisement
Table of Contents
