Glass Cooktop - GE JD968 Owner's Manual

Cleaningthe glass cooktop.
Oo.,ro, oo*o.,
Begin b,v locking the cooktop; see the
LOCK/UNLOCK fiOrD a .SECONDS
Control L ockout
section.
Cleanyour cooktepafter
each spill. Use CERAMA
BRYTE ® CeramicCooktop
Cleaner.
Normal Daily Use Cleaning
ONLY use CEI_Bd_<IABRYTE _ (;ermnic
Cooktop Cleaner on the glass cooktop.
Other creams may not be as eflecfixe.
To maintain and protect the smti_ce of
yore" glass cooktop, tollow these steps:
[] Before using the cooktop fin" the
fi_t tim e, clea n it with CEI_Bd_4A
BRYTE ':Ceramic Cooktop Cleane_:
This helps protect the top and
makes cleanup easier:
• , • ) " _ < @
[] Dad)
tlse { f (,E]_]_
BRYTE
Ceramic Cooktop Cleaner will hel I)
kee I) the cooktop looking new.
[] Shake the cleaning cream well.
Apply a few drops of CEIL_<IA
BRYTE _>Ceramic Cooktop Cleaner
directly to the cooktop.
[] Use a paper towel or CEIL_4A
BRYTE >Cleaning Pad tot Ceramic
Cooktops to clean the entire
cookt(>p sure_ce.
[] Use a {hw cloth or paper towel
to remove all cleaning residue.
No need to rinse.
NOTE: It is very important that you DO NOT
heat the cooktop until it has been cleaned
thorough/_
Use a CERAMA BRYTE _ Cleaning
Pad for Ceramic Cooktops.
Burned-On Residue
WARNING:DAMAGE to yourglass surface
mayoccurif you usescrubpadsother than the
pad includedwith yourcooktop.
[] Allow the cooktop to cool.
[] Spread
a few drops
of CEIL_4A
BRYTE _> Ce_ami{' (2ooktop Cleane_
on the entire bm'ned residue area.
[]
Using the included CEILBd_4A
BRYTE <_:' Cleaning Pad fin" Ceramic
Cooktops, _ub the residue area,
alI))Eing, , pressure as needed.
[]
[]
If any residue remains, repeat the
steps listed above as needed.
For additional protection, alter all
residue has been remoxed, polish
the entire surfl_ce with (;EI_<IA
BRYTE ': Ceramic Cooktop Cleaner
and a paper towel.
)
The CERAMA BRYTE _ Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts Cente_
See hTstructions under "To Order
Parts" section on next page.
NOTE:Do not use a dull or
nicked blade.
3d
Heavy, Burned-On Residue
[] Allow the {'ooktop to cool.
[] Use a single-edge razor blade
scraper at approximately a 45 °
angle against the glass surtace
and scrape the soil. It will be
necessary to apply pressure to
tile i'_lZOi" scraper in order to
remove the residue.
[]
After scraping with the razor
scraper, spread a few drops of
CEI_BdMA BRYTE ) Ceramic
Cooktop Cleaner on the entire
bm'ned residue area. Use the
CEIL_dVIA BRYTE '_Cleaning Pad to
remove any remaining residue.
[]
For additional protection,
after all residue has been
removed, polish the entire
stn'lace with CEI_Bd_<IA BRYTE':
Ceramic Cooktop Cleaner
and a paper towel.