GE WSLP1100D0WH Owner's Manual & Installation Instructions

Hide thumbs

Table Of Contents

Quick Links

Download this manual

This Owner's Manual is provided and hosted by Appliance Factory Parts.

GE WSLP1100D0WH

Owner's Manual

Shop genuine replacement parts for GE

WSLP1100D0WH

Find Your GE Washer Parts - Select From 4591 Models

-------- Manual continues below --------

Table of Contents

Need help?

Do you have a question about the WSLP1100D0WH and is the answer not in the manual?

Questions and answers

Summary of Contents for GE WSLP1100D0WH

Page 1 This Owner's Manual is provided and hosted by Appliance Factory Parts. GE WSLP1100D0WH Owner's Manual Shop genuine replacement parts for GE WSLP1100D0WH Find Your GE Washer Parts - Select From 4591 Models -------- Manual continues below --------...
Page 2: Table Of Contents
Safety Information ... . . 2, 3 Owner’s Manual & Installation Instructions Operating Instructions Control and Indicator Settings ..5, 6 WSLS1100 Loading and Using the Washer ..7, 8 WSLP1100 Special Washer Features .
Page 3: Important Safety Information
IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. WARNING! For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life. WATER HEATER SAFETY Under certain conditions hydrogen gas may be produced in a water heater that has not been used for two weeks or more.
Page 4 WHEN NOT IN USE Turn off water faucets to relieve pressure on Do not attempt to repair or replace any part of hoses and valves and to minimize leakage if this appliance unless specifically recommended a break or rupture should occur. Check the in this Owner’s Manual, or in published user-...
Page 5: Special Washer Features
Special washer features. Before starting the washer: • Load the laundry in the washer. • Add the detergent and fabric softener to the dispenser drawer. • Add bleach (if needed) to the bleach dispenser. Detergent and Fabric Softener Dispenser Drawer The detergent and fabric softener To Use the Fabric Softener Dispenser: Maximum...
Page 6: Control And Indicator Settings
About the control and indicator settings. ge.com Before starting the washer: • Load the laundry in the washer. • Add the detergent and fabric softener to the dispenser drawer. • Add bleach (if needed) to the bleach dispenser. To Use Automatic One-Touch Washing...
Page 7: Time Remaining
About the control and indicator settings. LOAD SIZE Loosely load clothes no higher than the top row of holes in the washer basket. The water level should just cover the clothes. Adjust the load size accordingly. WASH CYCLE These wash cycles control the length of the washing process. The chart below will help match the WASH CYCLE setting to your specific laundry needs.
Page 8: Loading And Using The Washer
Loading and using the washer. Always follow fabric manufacturer’s care label when laundering. ge.com Sorting Wash Loads Sort by color (whites, lights, colors), soil level, fabric type (sturdy cottons, easy care, delicates), and whether the fabric produces lint (terry cloth, chenille), or collects lint (velveteen, corduroy).
Page 9: Fabric Care Labels
Loading and using the washer. Fabric Care Labels Below are fabric care label “symbols” that affect the clothing you will be laundering. WASH LABELS Machine wash cycle Normal Permanent Press/ Do not wash Do not wring Gentle/ Hand wash wrinkle resistant delicate Water temperature...
Page 10: Installation Instructions
Installation Washer Instructions WSLS1100 WSLP1100 If you have questions, call 800.GE.CARES or visit our Website at: ge.com BEFORE YOU BEGIN PLUMBING • WATER PRESSURE—Must be 10 p.s.i. minimum to Read these instructions completely and carefully. 150 p.s.i. maximum dynamic pressure measured at IMPORTANT –...
Page 11: Electrical Requirements
Installation Instructions CAUTION: Before plugging in washer, read the following electrical requirements. LEVELING THE WASHER— ELECTRICAL REQUIREMENTS STATIONARY MODELS CAUTION: For personal safety, do Before connecting the hoses, the washer must be level. not use an extension cord or adapter plug with this Leveling locks are located at the bottom front of the appliance.
Page 12 Installation Instructions WASHER CONNECTIONS FOR STATIONARY MODEL WSLS1100 WARNING: Make sure the washer is unplugged. FLUSH WATER LINES CONNECT DRAIN HOSE Run some water from the hot and cold faucets to flush Form a U shape on the end of the drain hose with the the water lines and remove particles that might clog hose pointed toward the drain.
Page 13: Washer Connections For Stationary Model Wsls1100
Installation Instructions WASHER CONNECTIONS FOR STATIONARY MODEL WSLS1100 (CONT.) INSTALLATION CHECKLIST REMOVE THE PROTECTIVE FILM COVERING THE CONTROL PANEL Before starting the washer, check to make sure: ❏ Main power is turned on. ❏ The washer is plugged in. ❏ The water faucets are turned on. ❏...
Page 14 Installation Instructions WASHER CONNECTIONS FOR PORTABLE MODEL WSLP1100—ONE-FAUCET CONNECTIONS Use the hose connector provided with the washer for a CONNECT TO VALVE INLET one-faucet connection. TO CONNECT THE WASHER: Attach the COLD water supply connector to the COLD water valve inlet (color BLUE). Make sure the washer is inside the connector before REMOVE THE UNI-COUPLE ®...
Page 15 Installation Instructions WASHER CONNECTIONS FOR PORTABLE MODEL WSLP1100—ONE-FAUCET CONNECTIONS (CONT.) MAKE SURE THE TEMPERATURE REMOVE THE PROTECTIVE FILM SELECTOR IS SET AT COLD/COLD COVERING THE CONTROL PANEL SLOWLY TURN ON THE WATER FAUCET ALL THE WAY TO THE DESIRED TEMPERATURE SETTING INSTALLATION CHECKLIST Before starting the washer, check to make sure:...
Page 16 Installation Instructions TO DISCONNECT THE WASHER: TURN WATER FAUCET OFF DISCONNECT FROM WATER LINE Move the locking collar down and pull the hose connector down to disengage from the faucet adapter. Locking Collar Hose Connector UNPLUG POWER CORD AND RETURN IT TO THE STORAGE DRAIN WATER AREA Drain water from the hoses through the...
Page 17 Installation Instructions WASHER CONNECTIONS FOR PORTABLE MODEL WSLP1100—TWO-FAUCET CONNECTIONS If you have two separate water connections, your washer can be connected to both the hot and cold water faucets. PLUG THE POWER CORD INTO A This kit can be purchased from your dealer or from Parts 3-PRONG GROUNDED OUTLET and Accessories.
Page 18: Troubleshooting Tips
Before you call for service… ge.com Troubleshooting Tips Save time and money! Review the charts on the following pages first and you may not need to call for service. Status Indicators s Press POWER ON/OFF to turn off the washer.
Page 19 Before you call for service… Troubleshooting Tips WATER POSSIBLE CAUSES WHAT TO DO Too many suds • Switch to a lower sudsing detergent brand and follow Type of detergent instructions on package. Very soft water • Try less detergent. • Measure your detergent carefully. Use less soap if you Too much detergent have soft water, a smaller load or a lightly soiled load.
Page 20 OPERATION POSSIBLE CAUSES WHAT TO DO Washer pauses during The washer normally pauses wash cycle between washing steps Washer pauses during This is normal • The washer may pause during the spin cycle to remove spin cycle soapy water more efficiently.
Page 21 Before you call for service… Troubleshooting Tips PERFORMANCE (cont’d) POSSIBLE CAUSES WHAT TO DO Snags, holes, tears, rips • Fasten snaps, hooks, buttons and zippers. Pins, snaps, hooks, sharp or excessive wear buttons, belt buckles, • Remove loose items like pins, objects in pockets zippers and sharp objects and sharp buttons.
Page 22 You can rest easy, knowing that all your valuable household products are protected against expensive repairs. 800.626.2224 Place your confidence in GE and call us in the U.S. toll-free at for more information. *All brands covered, up to 20 years old, in the continental U.S.
Page 23 Code Date Placed Phone In Use Number Month Year Occasionally, we may allow selected companies to send you information. Check here if you do not want this information. GE Consumer & Industrial Appliances General Electric Company Louisville, KY 40225 ge.com...
Page 24 This warranty is extended to the original purchaser and any succeeding owner for products purchased for home use within the USA. If the product is located in an area where service by a GE Authorized Servicer is not available, you may be responsible for a trip charge or you may be required to bring the product to an Authorized GE Service location.
Page 25: Consumer Support
Contact Us ge.com If you are not satisfied with the service you receive from GE, contact us on our Website with all the details including your phone number, or write to: General Manager, Customer Relations GE Appliances, Appliance Park...

This manual is also suitable for:

Wslp1100 Wsls1100