GE J2B918 Installation & Owner's Instructions page 52

Installation of the range.
[]
install the Anti-Tip Device
An Anti-Tip bracket is supplied with
instructions tot installation in a varieP,,
of locations. The instructions include
all necessary infimnafion to complete the
installation, Read the Safety Instructions
and the instructions that fit your situation
beti)re beginning installation.
Typical insta//ation of anti-tip bracket attachment to waft
A WARNING:
::Ji:: Range must be secured
by Anti-Tip bracket
supplied.
_: If the Anti-Tip device supplied with the range
does not fit this application, use the universal
Anti-Tip device WB2X7909.
_: See instructions to install (supplied with
bracket).
::Ji:: Unless properly installed, the range could
be tipped by stepping or sitting on the doo_:
]qjury might result fi'om spilled hot liquids
or ti'om the range itself.
When All Hookups Are Completed:
MAKE SURE ALL CONTROLS ARE LEFT IN THE
OFF POSITION.
MAKESURE THEFLOWOFCOMBUSTION
AND VENTILATION AIR TOTHERANGEIS
UNOBSTRUCTED.
Converting to LP Gas (or converting back to natural gas from LP)
This rangeleaves the factory set forusewith natura/ g as.
If youwant toconvertto LP gas, theconversion m ustbe
performed bya qualifiedLP gasinstaller
The conve_ion instructions and I,P orifices can
be fi)und attached to the range next to the
pressure regulator:
Keep these instructions and the orifices in case
VO/I want to conxert back to nattlI'al gas.
52