Anti-Tip Device - GE J2B918 Installation & Owner's Instructions

Installation of the range.
[]
Install the Anti-Tip Device
An Anti-Tip bracket is supplied with
instructions fi)r instnllation in a varieW
of locations. The instructions include
all necessary inflmnafion to complete the
installation. Read the Safety Instructions
and the instructions that fit your situation
befi)re begimfing installation.
Typical insta//ation of anti-tip bracket attachment to waft
WARNING:
Range must be secured
by Anti-Tip bracket
supplied.
If the Anti-Tip device supplied with the range
does not fit this application, use the tmivex_al
Anti-Tip device WB2X7909.
See instructions to install (supplied with
bracket).
Unless properly installed, the range could
be tipped by stepping or sitting on the dora:
]qjm'y might result fl'om spilled hot liqtfids
or ti'om the range itself.
When All Hookups Are Completed:
MAKE SURE ALL CONTROLS ARE LEFT IN THE
OFF POSITION.
MAKESURE THEFLOWOFCOMBUSTION
AND VENTILATION AIR TOTHERANGEIS
UNOBSTRUCTED.
Converting to LP Gas (or converting back to natural gas from LP)
This rangeleaves the factory set forusewith natura/ g as.
If youwant toconvertto LP gas, theconversion m ustbe
performed bya qualifiedLP gasinstaller
The conve_ion instructions and I.P orifices can
be ti)tmd attnched to the range next to the
pressm'e regulator:
Keep these instructions and the orifices in case
VO/I want t() con_,ert back to nattlI'al gas.
52