Audio Setup - Philips DVP3880K User Manual

Setup

Audio setup

Analogue Output
General
Digital Audio
HDMI Audio
Video
Audio Sync
Volume
Audio
Sound Mode
Night Mode
Preference
[Analogue Output] - Adjust this setting for audio output through AUDIO OUT L/R .
• [Stereo] - Compress multi-channel Dolby digital sound to stereophonic sound.
• [LT/RT] - Compress multi-channel Dolby digital sound to 2-channel surround sound.
[Digital Audio] - Adjust this setting for audio output through COAXIAL/DIGITAL OUT.
• [Digital Output] - Select a type of digital output.
• [Off] - Disable digital output.
• [All] - Support multi-channel audio formats.
• [PCM Only] - Downmix to two-channel audio signal.
• [LPCM Output] - Select the LPCM (Linear Pulse Code Modulation) output sampling rate.
Note
• [LPCM Output] setting is changeable only when [Digital Output] is set as [PCM Only].
•
The higher the sampling rate, the better the sound quality.
[HDMI Audio] - Enable or disable the audio output through HDMI cable.
[Audio Sync] - Set a delay time for audio output when you play a video disc.
[Volume] - Set the default volume level.
[Sound Mode] - Select a preset sound effect.
[Night Mode] - Equalize loud sound and soft sound. Enable this feature to watch DVD movies at a
low volume at night.
Note
•
Applicable to Dolby Digital encoded DVD discs only.
20 EN
Stereo
On
Off