Everpure MRS Reverse Osmosis System MRS-100 Specification Sheet

Configurable system that delivers reverse osmosis or blended water
for multiple foodservice applications
I N S T A L L A T I O N T I P S
Choose a mounting location suitable to support
the full weight of the system when operating
Deliming of equipment prior to application is
recommended
Never use saddle valve for connection
Use 3/8" (min.) water line
The water inlet must supply a minimum of 0.7
gpm
Install vertically with cartridge hanging down and
allow 2 inches above and below unit for cover
removal and service access
Allow clearance to right of unit for optional pre-
filter
Refer to Installation, Operation & Maintenance
Manual for cartridge flushing and RO start-up
MRS 100/100CC/225/225CC
MRS R ev er se Os mo sis Sys t em
MRS-100 Sys: EV9970-07
MRS-100 Sys: EV9970-07
MRS-100CC Sys: EV9970-10 MRS-100CC Sys: EV9970-10
MRS-225 Sys: EV9970-08 MRS-225 Sys: EV9970-08
MRS-225CC Sys: EV9970-09
MRS-225CC Sys: EV9970-09
Pre-filter Kit: EV9795-81
Pre-filter Kit: EV9795-81
6TO-BW Cart: EV9607-41 6TO-BW Cart: EV9607-41
MR-100 Cart: EV9627-11 MR-100 Cart: EV9627-11
MR-225 Cart: EV9627-03
MR-225 Cart: EV9627-03
7CC-BW Cart: EV9627-05 7CC-BW Cart: EV9627-05
P5 Cart: EV9109-08 P5 Cart: EV9109-08
* System shown with optional Pre-filter kit.
* System shown with optional Pre-filter kit.
O P E R A T I O N T I P S
Change filter cartridges on a regular 6-month
preventative maintenance program
Change RO cartridges on a regular 2-year
preventative maintenance program
Change cartridges when capacity is reached
Always flush the filter cartridge at time of
installation and cartridge change
Proper pre-treatment is required to control RO
Cartridge (membrane) scale formation and/or
fouling
- Raw water hardness in excess of 7 grains per
gallon should be softened
- The raw water may contain particulates and
the use of a pre-filter is recommended
Contact EVERPURE Technical Service for
pre-treatment recommendations
B E N E F I T S
Improves equipment life and performance by
removing at least 90%+ of all dissolved solids
that cause scale build-up
Guards against taste and odor causing
contaminants while removing dirt, particulates
and dissolved minerals that can adversely affect
taste of water and beverages
Sanitary cartridge replacement is simple, quick
and clean. Internal filter parts are never exposed
to handling or contamination
Wall mount design allows flexible installation
Reduces limescale build-up that can cause
excessive machine downtime and increased
maintenance costs. Plus, scale reduction reduces
energy costs
"CC" models introduce a small amount of
hardness minerals back into the treated water.
This controlled re-mineralization is desirable for
coffee and other applications that require some
hardness to achieve optimum results
A P P L I C A T I O N / S I Z I N G
Mineral Reduction System for foodservice
applications
Ideal for:
Flash steamers, conventional steamers, cheese
melters, combi-ovens and coffee/espresso
machines
Output capacity dependant on membrane
selected:
100 gallons per day (379 lpd)
225 gallons per day (852 lpd)
For use in coffee, steam, reconstitution, ice and
multiple applications