Sounds And Voices; About Sounds And Voices; About Computer Voices; Selecting A Voice - TomTom Start 60 Reference Manual

Sounds and voices

About sounds and voices

Your TomTom device uses sound for some or all of the following:
Driving directions and other route instructions

Warnings that you set

Hands-free phone calls

Note: Hands-free calling is not supported on all navigation devices.There are two types of voice
available for your device:
Computer voices

Computer voices are generated by your device. They provide route instructions and read

aloud city and street names, traffic and other useful information.
Human voices

These are recorded by an actor and only provide route instructions.

About computer voices

Your TomTom device uses text-to-speech technology and computer voices to read the street
names on your map as it guides you on your route.
The computer voice analyses the whole phrase or sentence before speaking, to ensure that the
sentence sounds as close as possible to natural speech.
Computer voices can recognise and pronounce foreign towns and street names. For example, the
English computer voice can read and pronounce French street names.

Selecting a voice

To select a different voice on your TomTom device, either tap Change voice in the Settings menu
or tap Voices, then tap Change voice and select the required voice.

Changing the volume level

You can change the volume on your TomTom device in several ways.
In the Driving view.

Tap the central panel on the status bar and move the slider to adjust the volume. The last route
instruction is played so you can hear the new volume level.
In the Settings menu.

Tap Settings in the Main menu, then tap Volume and move the slider to adjust the volume.
Tap Test to listen to the new volume level.
49