Safety Instructions - GE AGE14 Owner's Manual And Installation Instructions

IMPORTANT SAFETY INFORMATION.
READALLINSTRUCTIONS BEFORE USING.
WARNING!
For your safetg, the information in this manual must be followed to minimize the risk of fire, electric shock
or personal injurg.
SAFETY P RECAUTIONS
_ Use this appliance only for its intended
purpose as described in this Owner's
Manual.
N This air conditioner must be properly
installed in accoMance with the Installation
Instructions before it is used.
N Turn tile mode control m 0FFand unplug
your air conditioner before making any
repairs or cleaning.
NOTE:We strongly recommend that any
selwicing be performed by a qualified
individual.
N Never unplug your air conditioner by
pulling on the power cord. Always grip
plug firmly and pull straiglnt out from tile
receptacle.
N Repair or replace immediately all dectliC
selwice cords that have become frayed
or otherwise dam_ed. Do not use a cord
that shows cracks or abrasion damage
along its length or at either the plug or
connector end.
@ For your _ety...do not store or me
combustible materials, gasoline or other
flammable vapor:s or liquids in the vicinity
of this or any other appliance.
HOWTOCONNECT ELECTRICITY
Do not, under any circumstances, cut or remove
the third (ground) prong from the power cord.
For personal safetg, this appliance must be
properly grounded.
The power cord of this appliance is equipped
with a Nprong (grounding) plug which mates
with a standard 3-prong (grounding) wall
outlet m minimize the possibility of electric
shock hazard from this appliance.
Have the wall outlet and circuit checked by
a qualified electrician m make sure the outlet
is properly grounded.
Where a 2-prong wall outlet is encountered,
it is your personal responsibility and obligation
m have it replaced with a property grounded
3-prong wall outlet.
The air conditioner should always be plugged
into its own individual electrical outlet
which has a voltage rating that matches the
rating plate.
This provides the best peribrmance and also
prevents overloading house wMng circuits
which could cause a fire hazard from
overheated wires.
See the Installation Instructions, Electrical
Requirements section for specific electrical
connection requirements.
2