GE AGE14 Owner's Manual And Installation Instructions page 10

Windowinstallationinstructions.
Remove the Air Conditioner From the Case
[] Remove the 2 shipping screws from the
back of the case.
] Remove the 2 screws on each side of the
case. Keep these for later use.
SNpping screws
[] Slide the air conditioner from the case by
gripping the base pan handle and pulling
forward while bracing tile case.
10
Prepare the Window and the Case
] Cut the window sash seal to the proper
length. Peel off the hacking and attach the
seal to the underside of the window sash.
] Caref_dly insert the plastic frame guides
into tile bottom of the case on each side.
ofcase
guide
] Remove the backing fi'om the top mounting
rail seal strip and attach the seal to the
bottom of the top mounting rail.
] Install the top mounting rail with 3 type A
screws on the inside of the case. Insert the
frames for the accordion panels into the
top mounting rail and the frame guides.
Attach the accordion panels to the side of
the case using 5 type A screws.
Topmounting rail
Cz_
('_ I
Frame guides