GE JDP39 Owner's Manual page 16

Usingthe self-cleaning oven.
@
@
How to Delay the Start of Cleaning
Make sure tile clock shows tile CoITect
time ot day.
] I_ach tile dooi:
[] Touch tile SELFCLEAN pad.
] [)sing tile + (IT- pads, enter tile
desired clean tin/e.
The Clean T/nTe is normally 4 hours. Youcan
change the Clean T/nTe to any t/Thebetween 3
and Shours, dependl)_g on the amount of soil i)_
your oven.
[] Touch tile DELAY STARTpad. Tile
earliest deJa_ Stal_t time _ou can set
will appear in tile display.
] [)sing tile 4- (w - pads, enter tile
time of <lax _ou _ant the clean c_cJe
to staYt,
[] Touch the START/ON pad.
The display will show the delay sml_t set
time. It will not be possible to mflatch the
oven door tmtil the temperature drops
below the lock temperature and the
LOCKEDdoor light goes oil
When the LOCKED door light is oil
mflatch the dooI'_
ToStop a Clean Cycle
Totuh the CLEAR/OFFpad.
Wait until the oven has cooled below the
locking temperature to unlatch the (loo_:
You will not be able to open the door
right away mlless the oven has cooled
below the locking temperature.
After a Clean Cycle
You max notice some white ash in the
oxen. _ii)e it up with a damp ch)th alier
tile
()veil cools,
If white spots remain, remove them with a soap-
filled scouringpad and rinse thoroughly with
a w)_egar a nd water ml)_ture.
These deposits are usually a salt
residue that cannot be remoxed b_
the clean cycle.
If the oven is not clean after one clean
c}cle, repeat the cxcle.
!i_:You cannot set the oven fiw cooking
until the oven is cool enough fi)r the
door to be unlatched.
_ While the oven is sel6cleaning, you
can press the CLOCKpad to display
the time of day. To return to the
clean countdown, press the
COOKING
TIME pad.
_Ji:: Apply a small amount (ff vegetable oil
to a paper towel and wipe the edges of
the oven shelves with the paper towel.
Do not spray with PanI e_or other
lubricant spra D.
16