Kitchen Timer - GE PS978STSS Owner's Manual

Next step control freestanding, slide-in and drop-in electric ranges
Hide thumbs Also See for PS978STSS:
Table of Contents

Advertisement

Using the clock, kitchen timer, end control lockout.
GEAppliances.c
To Set the Clock
The clock must be set to the correct time of day
for the Delay Start functions to work properly.
The time of day cannot be changed during
a delayed cooking or a delayed self-cleaning
cycle.
%
[21
Touch the CLOCKpad.
Touch the number pads until the correct
time of day is shown in the display. If the
number pads are not touched within one
minute after you touch the CLOCKpad,
the display reverts to the original setting. If
this happens, touch the CLOCKpad and
enter the time of day.
r-_ Touch the STARTpad until the time of day
shows in the display.This enters the time
and starts the clock.
To check the time of day when the display is
showing other information, touch the CLOCK
pad. The time of day shows until another pad
is touched. To change the time format or turn
off the clock display, see the SpecialFeatures
section.
TIMER
ON
TIMER ]
OFF
The KitchenTimer is in hours and
minutes.
TheKitchenTimerdoesnot controloven
operations. T hemaximum settingon the
KitchenTimeris9 hoursand 59 minutes.
To Set the Kitchen
Timer
%
[]
Touch the TIMER ON pad.
Touch the number pods until the amount
of time you wont shows in the display. For
example, to set 2 hours and 45 minutes,
touch 2, 4 and 5 in that order. If you make
a mistake, touch the TIMEROFFpad and
begin again.
r_
Touch the STARTpad.
After touching the STARTpod, SET
disappears;this tells you the time is counting
down, although the display does not change
until one minute has passed.Seconds will not
be shown in the display until the lust minute is
counting down.
r_
When the kitchen timer reaches :00, the
control will beep 3 times followed by one
beep every 6 seconds until the TIMEROFF
pad,
The 6-second tone can be cancelled by
following the steps in the Special features of
your oven control section under Tones at the
End of o Timed Cycle.
To Reset the Kitchen
Timer
If the display is still showing the time remaining,
you may change it by touching the TIMERON
pad, then touching the number pads so that the
time you want appears in the display.
If the remaining time is not in the display (clock,
delay start or cooking time are in the display),
recall the remaining time by touching the
TIMERON pad and then touch the number
pads to enter the new time you want.
]
To Cancel the Kitchen Timer
TIMER
TIMER
Touch the TIMEROFF pad.
ON
OFF
How
to Lock
Out the Controls
Control Lockout or Range Lockout will allow
you to lock out the touch pods so they cannot
be activated when touched. Some models
have Range Lockout which will also disable the
surface units. Hake sure all surface unit controls
are turned off when using Range Lockout. Any
surface unit that is set to an "on" position while
the Range Lockout is enabled will automatically
come on after the Range Lockout is disabled.
To lock/unlock the controls:
F-_ Touch and hold the Control Lockout or
Range Lockout pad for 3 seconds. The
oven display will show "Loc On Loc".
To unlock the control, touch and hold the
Control Lockout or Range Lockout pod
for 3 seconds. The oven display will show
"Loc OFF Loc".
When this feature is on, the touch pads will not
respond except for the Clear/Off pad.
The adjustment will be retained in memory
after a power failure.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents